Orbit55071 Voyager I & II Gear Drive Rotor Water Sprinkler Nozzle Rack (10-Pack)

Item was exactly as described and works perfect.

The kits I received actually came with 10 nozzles not 8: 5 low and 5 regular each with various flow rates. It was cheaper to buy 10 sets than 5. These nozzles fit perfectly in the Voyager 1 sprinkler heads that I bought in the 2-packs at Home Depot. The would fit in Hunter gear rotators as well.I've got six sprinkler heads in one zone: 4 corners and two middles. To even out the water distribution the middles need to be double the corners. Since the max number of Voyager gear rotator sprinkler heads in that zone based on the size of the pipes and water pressure was 4 using the factory 3 GPH nozzles, I had to make the middles 2 GPH and the corners 1 GPH and then run the sprinklers longer to make sure there is 1" per week +/-. Also, to make sure the sprinklers didn't spray too far based on the head-to-head spacing, I used the Low nozzles rather than the Regular ones, and it worked out perfectly.I only ended up needing 4 sets to replace the nozzles in 6 heads: 4 corners at 1 GPH and then the 2 middle nozzles at 2 GPH from the same sets. However, 10 sets was cheaper then 5 sets and I'll use the extras upgrading other zones. Buyer the Voyager 1 heads in the 2 pack for $15 on-sale ($18 regular price), plus $3 for two sets of nozzles for a net of $9/head on-sale or $11.50 regular price, versus the "Voyager 2 Pro" heads with nozzles for $12 only saved between $0.50 and $3.00/sprinkler.

Worked well with my system. I wish I didn't have so buy so many sets as I only needed two or three nozzles in each set.

I needed more flow from one of my Orbit Voyager sprinklers. I easily exchange my existing nozzle with one from this package.

I should have read the fine print. As it turned, these nozzles are the wrong size for my Orbit sprinklers.

I had to buy the Voyager 2 because I needed a 3/4” inlet and the options are limited. I have a small yard and the Voyager 2 was shooting the front of my house. I bought these in hopes that it would reduce the distance and power of the standard Voyager 2. I used the 1Gpm Low nozzle and it was absolutely perfect. See picture attached for a close up of the nozzle sizes and shapes. Half of the rack are meant for lower flatter patterns I believe; they are designated with an ‘L’ ...Hope this helps!

The nozzle fit my sprinkler head but I have not tried it out yet.

Ad says 8 pack and you get 10 in one package. Sorry I won’t order any more since I only got enough for one sprinkler

Unfortunately did not fit the Saturn III sprinkler heads as Orbit's website indicated.