Lamicall Phone Stand for Apple 15W MagSafe Charger - [Charger Not Included] 360 Rotation Adjustable Aluminum Charging Holder Dock for Desk, Compatible with iPhone 17 16 15 14 Air, Pro, Pro Max, Plus

I’ve bought three of these. The first two were great - good design, and good stability. I can rotate it up to charge my wireless AirPod charger. I bought a third that unfortunately is too loose when you insert a NEWLY purchased **edit July 2025** MagSafe charger (Apple has made the puck smaller at some point). With the newer, smaller Apple magsafe puck, when I pull the phone off the stand, it almost always pulls the whole charger out unless you twist and pull awkwardly. I tried a couple things, but just ended up using some scotch tape to keep the charger in place. Otherwise, the stand was good enough that I’ve bought it three times now in lieu of other stands I’ve used. Edits above on July 2025: I owe the manufacturer an apology! Apple shrank their puck size evidently - when I used the puck that didn't fit into the last of the 3 stands I bought on another stand, it had the same problem. Perhaps they need a new version for a newer magsafe puck size, but their charger works fine for older pucks (not sure when the change was made by Apple...). So... great stand for the older/original-sized Apple magsafe pucks, but beware of the situation!

Excellent product. The stand has great mobility — I can move my phone in any direction with ease, whether I’m watching videos, on a call, or just charging. I really appreciate how heavy and solid the base feels, and the grippy bottom keeps it stable on my desk without sliding around. It’s a well-designed, high-quality stand that pairs perfectly with the MagSafe charger. Highly recommend if you’re looking for both function and flexibility.

The squishy cushion bit on the inside of the ring space for the magsafe charger is high quality, unlike some of thr other cheaper stands on here. If you pick up phone a certain way, it doesn’t move the stand, which I like. If you take it off directly, it will move it, because the base is only so heavy, and there is no adhesive on the base, just silicone pad. (which I prefer because i move work stations once in a while). I also like the height and angle it holds my phone; good feng shui. I feel like this could be a teensy bit cheaper, like 15 dollars, but I’ll keep it cause I think it’s the best designed one of all these iphone desk stands.

Was trying this product to see if it produced the desired result of keeping my phone up and angled toward me like a night clock. The Apple MagSafe charging cable fits perfectly into the stand, and it does a marvelous job of holding my iPhone. The one downside is that the MagSafe charger cable is running down below where the phone is held up on the stand, but that is a minor issue. The Apple standby feature works perfectly with this, as when the iPhone is charging magnetically and in a horizontal position on its side, it will display large widgets with whatever information you would like. The stand is a silver and chrome style coloring, which combined with the elegance and look of the iPhone Looks very nice on the nightstand.

lamicall DP 09 Charging Stand (MagSafe compatible) Amazon's product page of this charging stand gives a very thorough description of the stand with excellent pictures and a video. Still, it seems to need to be said: • The MagSafe charger is not included * This stand only works with the MagSafe equipped iPhone 12 and 13 families. The stand is extremely well made and finished. The stalk is polished chrome. The base and MagSafe plated have a semi-sating, glass-beaded type of surface. Smooth to the touch it's lightly textured surface won't show finger prints. The base is 86mm x 86mm, the stalk is 107mm from the desk surface to the ball at the end of the stock, and the charging plate that holds the puck is 66mm x 66mm. My 12 mini in an Apple MagSafe leather case is 67.7mm wide. The base has a rubber pad designed to prevent slipping on a smooth surface and it works well. The stand weighs approximately .5lbs. Despite the weight it may lift up or move slightly when removing a phone. Tipping the bottom of the phone towards me before lifting the phone keeps the base in place as though it was glued to the desk. Amazon sells some micro-suction cup stuff if greater adhesion is needed. The ball and socket of the pivot is very tight and the base will need to be held to adjust the angle of the charging plate. Because of it's offset design, the lowest position will always have the phone at a slight angle. It will tilt back to about a 45º angle. The left/right horizontal movement is limited to just a few degrees, but since the base is movable, that shouldn't matter. When tilted back completely, my AirPods 3 in a leather case will adhere to the MagSafe puck and charge. Any more vertical angle, the case will fall. Without a case, they may "stick" to the charging puck better, but I didn't test that. I got the lamicall charging stand to replace a cheap, basic one-piece non-adjustable aluminum MagSafe compatible stand. It held the 12 mini so close to the table, I couldn't plug in a set of EarPods. AirPods were not an option for my purpose. The phone had to be twisted to allow me to use EarPods (or any headset) and that was unacceptable to me for various reasons. The lamicall stand was on a desk in a YT video about other Mac Stuff. Beside having the clearance needed for a headset plug, it was also a really elegant little stand compared to my previous utilitarian model that wasn't working out for me. Amazon was the first place I looked, and the price was much less than I had expected. As shown in the ample product description, there's no "cable management" incorporated with this charging stand. The cable is literally hanging out in the open. It could be anchored to the stalk in a number of creative ways but it wouldn't be hidden. It was no surprise so it didn't factor into the review, other than a mention. There was on small nit with this stand. I can see that the silicone ring holding the puck will loosen over time and come out of the stand, attached to the phone. How long before this starts is anybody's guess. This seems to be a not uncommon problem with these MagSafe holders. A strip of some heavy bond paper cured it with my previous stand. I'd like to see a non-charging version of this stand as is, for those places and times where charging isn't needed and you just want to park the phone nearby. Overall I am extremely pleased with this stand, an attractive well made product for a very reasonable price.

Perfect for iPhone 16 pro max. Strong sturdy aluminium. Solid metal. Simple sleek design. Doesn’t take up much space on my small bed side table. Apple mag safe charger fits perfectly in the stand. Actually a lot sturdier and more stylish than I expected for the price! Feels like a premium item.

Buen producto

stand is sturdy.. good if you have a mag charger which is only place on top of desk.. ideal gift for office person

Don’t buy it!

I love this thing so I bought another one. Like proper decent quality.