AUTOGEN 200A MIG Welding Machine, 3 in 1 MIG/Lift TIG/MMA Welding Machine, 110V/220V Dual Voltage Stick Welder IGBT DC Inverter

The media could not be loaded. The plasma cutter has cut everything that I’ve attempted to cut. Cuts nice, fast, everything works. I love this one, it worked great no problems right out of the box.Tried on some thin sheet metal, as well as a steel stake. I was able to cleanly cut a design on the sheet metal, and get a clean cut through the steel stake. I have only used the 110 side of it and it's cut everything I needed to. Very happy with my purchase.Comes with all you need, gas hose line, torch, pressure meter gauge, 10” ground clamp and even the welding mask. Cuts 1/2” to a maximum of 2/3”. Automatic Dual Voltage 110/220V. Just connect the power plug to the 110V or 220V power supply, and the machine will automatically identify the voltage.Easy to set up and a quick learn to get it running. A great addition to any shop. I highly recommend this product. High quality for an affordable and excellent product.

worst welder I ever tried. would put down a decent bead for about 2 inches then just fizzle out and burn back using. 220 flux core that I had myself. amazon gave me 50 bucks off so I went for it that was the reason I went for it would also make weird noises when it was welding after 2 inch bead did not try gas I really wanted a dedicated 220 flux core hoping that it would put down a good weld with more power no chart, I did have it at full blast just for testing on 1/4 inch steel. would not recommend

Update:Customer service reached out to me and helped remedy the situation. After a few months of use this little machine has grown on me and has been an absolute workhorse lately. After dialing in the settings it's very consistent, smooth and extremely useful. I even built a cart with it for it. It's been fun and I am keeping this one.I have not been able to test with gas or lift tig, but flux and stick have both been great.Original review:When this little machine arrived the first thing I noticed was exterior damage. Bent cooling fins on the inductor from installation, stripped screws, terrible paint application on the door for the wire feed and exposed wires shorted together at the control panel. Those two wires are the voltage references lines from the positive and negative feeds to the dinse connectors. This means that they are exposed to the full welding current and had I ran the machine it would have sent 100+ amps directly across these wires and destroyed the machine and potentially started a fire. I cannot stress enough how dangerous of a defect that is.The welding rods were in the bottom of the box and almost all of them were destroyed, not that I would have used them anyway, but it's worth noting. The packaging wasn't terrible, but the accessories were just tossed in the bottom under the machine.I fixed all of the defects myself and the welder has been great to use. Consistent arc, excellent runtime and a good value had it been assembled properly. I cannot speak to the accuracy of the current settings as I have not tested them with an amp clamp yet.That said, I would be very wary. Look at the other reviews. This unit needs MUCH stricter QC. This could have burned down my shop and WOULD have destroyed itself.Not a good first impression.

I bought this for my brother who recently started welding art pieces. Since he is just creating fun stuff as a hobby, I didn't want to break the bank, but I still wanted something reliable. This is the best of both worlds. It's budget friendly, but works great. It's very easy to use and beginner friendly. There is a bit of a learning curve, but he caught on quickly. He is obsessed with it and he has already made me some fun sculptures for my garden.

Instruction book is rediculous/ States comes with ground attached. Mine did not and no mention of where it goes. Regardless, no matter what port I use this welder will not work, I get no spark. emailed manufacturer numerous times with no response. Total fail, biggest waste of money ever spent.

Welder looks good but the glass on the mask came broken, think they should ship the glass inside the welding compartment to keep it from shattering.

The media could not be loaded. Powerful, works well so far. Good for different types of metals. Works for even stainless steel, and iron. Different speeds to choose. Also different modes. Easy to carry around. We like it, we've been doing lots of DIY projects, car parts, electric motors, and also some other car projects, this welder has been very useful. We like that it is gasless, easy to set up, easy to use. It doesn't take long at all. It came with all the parts listed. We like that it has protection features, aka safety features. The package isn't too heavy, either. Good value.Excuse my messy garage. Good thing is that this machine doesn't take too much space in my garage.Let me know if my video and pics are helpful.

Never used because it had obviously been used before I received it. Still had previous buyer's shipping label on box as if it was returned then put right back on the truck with a new label with my address and sent to me. I requested exchange for new but only option was refund. Not pleased...