Intake Manifold Compatible with Mercedes C230 C300 C350 E280 E350 GLK350 ML350 ML450 S400 SLK300 R350 V6 272 Engine 2006-2013 Replace 2721402401 2721402201

Love the quality and performance, these are a challenge to install so make sure you have someone qualified to install, labor should be around 400-600$ no leaks and fits perfect great quality!

Took some time to get the intake on, prepare for a several hour job. Thank goodness for you-tube to help me through this job. But once it was on the car ran so much better. Car was bogging and barely running until I changed the manifold. It’s been 3 months and still running great.

DO NOT BUY FROM THESE PEOPLE, THEY DO NOT WARRANTY THEIR PARTS AND ALMOST IMPOSSIBLE TO GET A HOLD OF THEM, ALSO THE PARTS THEY SELL ARE JUNK RIGHT OUT OF THE BOX, THE PARTS THEY SELL ESPECIALLY THIS MANIFOLD ARE MADE POORLY AND WILL TIGGER AN CHECK ENGINE LIGHT AND YOU WILL NEED TO PULL THE MANIFOLD AGAIN TO REPLACE IT WITH A REPUTABLE COMPANYS MANIFOLD, DO NOT BUY FROM THESE PEOPLEGARBAGE GARBAGE GARBAGE

The manifold is well constructed and an exact fit for the existing manifold. 2 things to note, First, the ports for the injectors have residual casting debris that needs to be removed before inserting the manifold in the car otherwise aluminum debris will get into the cylinder. Second, the boat bosses on top are not tapped and self tapping bolts are not provided. Fortunately, I have a metric tap set and was able to tap them all. Otherwise, A good product. The throttle body bolt holes were tapped.

It fits perfect and has the car running like new, the only thing I don’t like is it goes out in a year. I got it last year in february and it’s time to change it again. I’ve also learned after reading the reviews they don’t do warranty.

Works great

Attach it to your car and use it for a few days, the intake flap will correct itself and the hardness will go away. When I first bought it, the intake flap was very difficult to open and close because the joint was grease and new and not original parts.After the first day you install it in your car, delete the code on the icm for a few days and open the engine hood and push the intake flap down with your hand, do this for a few days, it will get used to its place and will no longer be difficult to open and close, after a few days you will not see the fault code.If the intake manifold air flap you bought is only difficult to open and close, check all the hoses, if there are no tears and cracks, attach it to your car and wait for it to adapt for a few days.

On time